LED Hoop Rechargeable Upgrade

Rechargeable Upgrade Kit

Rechargeable battery pack for the ProdMod LED Hoop Kit battery charger is small and compact

Snap In DC Jack - positive terminal is on the left leading and attached to the center pin

Convert your 0.814 x 1 inch thick LED hoop into a rechargeable hoop!
Charges faster than any other LED hoop on the market!*
Charger is small and compact just like your cell phone charger.
It accepts 100-240VAC.
Weighs only 5 oz.  Easy to carry in your purse or travel bag.
Only one simple wire to connect to your hoop.
An easy to read indicator light tells when its charged.
Charge at any time, no need to wait for the lights to die out.

Tech Specs



LED On Time

*3-5 hours (21 LEDs)

< 4 hours (12-16 LEDs)

Recharge Time

1 hour

12 Hours

Recharge Cycles

(Battery Life)

More than 1000!

300 to 1000 with a smart charger.

Charger Type

Fast Smart Charger with indicator light and only one connector, no switches or settings to worry about. Completely safe.

Slow Charger with 6 different plugs and two sliding switches that must be set properly. Improper setting can cause a fire!

*LED On Time is subjective since LEDs dim over time. But generally they remain very bright for the first 3 hrs of continuous use. The battery life is also extended if the LEDs are turned off for about an hour or so between sessions.

**I only compare my hoop to a PSI Hoop because their tech specs are well documented and are considered a high quality hoop. There are pros and cons to every hoop design, I am only comparing battery technology here.

Kit Contents:

1 – rechargeable battery with built in fuse protection (1.6 oz)
1- DC Jack
1- Compact quick charger

Instructions are located here
Modification Difficulty: Medium
Order yours for $39.99


**If you do not yet have a ProdMod LED hoop to upgrade you can definitely make your own Rechargeable ProdMod LED Hoop from scratch using Maker Kits.



  1. Kelly Hannah says:

    You sent me info on rigid tubing so that I can make a rigid hoop. If I’m going to purchase 100 ft of tubing, I should get info on the rechargeable battery kit and the plain AA battery kit so that I’m not stuck with 80 feet of tubing. Can you tell me where I can purchase these, or do I need to go through you?


  2. prodmod says:

    the battery charger and DC jack is on this page and is meant for people who already have a prodmod LED hoop.
    Otherwise you can get the parts you need on the maker kit page
    and LED page

    the AA module is here

    and if you dont want to buy a kit but you want single parts you can find some here

  3. heather says:

    what is the voltage of the rechargable batter. i got the kit 6 months ago from u and love my hoop!!! i want to make a set of thinner twins tho and was hoping of using the same switches and plugs and charger but the batt u carry is too large : (

  4. prodmod says:

    the rechargeable battery voltage is 3.2Vdc. You can’t use the same charger for any other battery. So if you must make a thinner rechargeable hoop you have to use three AAA NiMh batteries, and find a new charger that charges those batteries. Might need a new DC jack as well.

  5. Clairity says:

    I think I remember seeing somewhere that you need to use at least 20 LEDs with the rechargeable system or else you’d need to use a resister (though I can’t find that now). I want to try to make some twin mini hoops that would use less LEDs. Probably 15 each. If I want to use the rechargeable system for those, what kind of resister would I need? Thanks!

  6. Meta Daniel says:

    Hey, I made one of your hoops not to long ago, I love it, but my charger got worked and now one of the prongs has come off. There is a store near me that sells all kinds of chargers, but I’m not sure they have the right one. would a 12volt/ 1 amp charger work? or what are the specs I need? Thanks!

  7. nba 2k16 mt goldah says:

    Many thanks extremely practical. Will share site with my friends.|

  8. csgo skins bo3 says:

    I benefit from browsing your internet site. thnx!|

Leave a Reply

Your email address will not be published.

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Improve Your Life, Go The myEASY Way™